Standalone Laser Marking System

RDM6020V-M1Standalone Laser Marking System

Parameter

Name Specification
Compatible Lasers Fiber Pulse Lasers, MOPA Fiber Lasers, CO2 Lasers, UV Lasers, Red + Blue Lasers
Communication Interface Supports USB 2.0 and Wireless WiFi Communication
Motor Interface Pul+Dir Common Cathode
Control Panel 5" Touchscreen, Housing Size: 133 mm × 80 mm × 14.4 mm
Galvo Protocol XY2-100
Input / Output 5 Inputs, 4 Outputs
Vision Functions Supports Industrial Cameras and UVC Cameras
System Functions Offline Marking, APP Marking, Vision Positioning Marking
Marking Functions 2D Plane Marking, Relief Deep Engraving, Large-Area Marking, Rotary Marking (Chuck, Roller)
Compatible Software Mantismark (V1.00.05) PC Software, Operating System: Windows 7 / 8 / 10 / 11, 32-bit or 64-bit
Companion APP Mantisolo, Operating System: Android 8.0 or Above, iOS 12.0 or Above
Supported Languages 12 Languages: Simplified Chinese, English, Traditional Chinese, French, German, Turkish, Spanish, Portuguese, Arabic, Italian, Korean, Dutch
Dimensions L: 91.5 mm, H: 58.5 mm
Firmware Upgrade Supports Remote Mainboard Firmware Upgrade

Added depth map relief engraving and deep engraving processing functions.
Added support for LightBurn and LaserGRBL open-source software.
Added 12-language support for both PC software and control panel display.
Added basic-mode manual galvo calibration and optimized manual calibration operations.
Added IO-based automatic Z-axis switching and IO mode light source switching functions.
Added start signal selection and door protection signal functions in the PC software.
Optimized post-processing display after bitmap import.
Optimized USB transmission compatibility issues on some systems.
Optimized single-axis linkage processing function.